English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    Wall Mounting Support for NOTIFIER® M700 Module [M200E-PMB]
    Wall Mounting Support for NOTIFIER® M700 Module
    Ref.: M200E-PMB
    Wall mounting support for M700 serie modules. Its used to install a unique module in a suitable cabin through two M4 screws.
    V.A.T. included
    Consult
    Mounting Box for 6 NOTIFIER® Modules [SMB6-V0]
    Mounting Box for 6 NOTIFIER® Modules
    Ref.: SMB6-V0
    Surface mounting box to includes up to six standard modules from M7xx or MI-Dxxx serie. Built in antistatic ABS V0 flame retardant in a cream colour and with transparent lid to see LEDs and the direction of modules.
    V.A.T. included
    53.22 €
    HONEYWELL™ Module of 4-20mA Addressable Input [MMT]
    HONEYWELL™ Module of 4-20mA Addressable Input
    Ref.: MMT
    Addressable interface for monitoring of analogical signal of 4-20mA deriving of flammable or toxic gas detectors. Includes a dedicated directionning (1-99) and is connected directly to an analogical communication loop of PEARL centrals, occupies 1 sensor direction. Can be programmated and display 4 differents status: PR AL1, PR AL2, AL1 and AL2. Requires extern power supply of 15-30VDC. Requires an activation license for each PEARL central.
    V.A.T. included
    Consult
    Mounting Box for NOTIFIER® Module [M200SMB]
    Mounting Box for NOTIFIER® Module
    Ref.: M200SMB
    Surface mounting box for M7xx or MI-Dxxx serie standard module, accept a unique module. Includes a frosted plastic cover. Allows the see the product identification label, LEDs and direction selectors.
    V.A.T. included
    16.06 €
    Interface HONEYWELL™ Interface for 4 Circuits of 4-20mA Input [IIG4N]
    Interface HONEYWELL™ Interface for 4 Circuits of 4-20mA Input
    Ref.: IIG4N
    Addressable interface with 4 input circuits for monitoring of analogical signal of 4-20mA deriving of flammable or toxic gas detectors. Includes a dedicated directionning (1-99) and is connected directly to an analogical communication loop, occupies 12 consecutive directions of detectors. Includes a plastic box for surface mounting.
    V.A.T. included
    669.88 €
    NOTIFIER® Module with 2 Inputs and 1 Output [M721E]
    NOTIFIER® Module with 2 Inputs and 1 Output
    Ref.: M721E
    Directionable monitor and control module. Dispose of 2 monitored input circuits for monitoring of alarm equipment and technical signs with free voltage contact and 1 relay output circuit with free voltage contact. Includes a isolator circuit of loop short circuit, LEDs for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other surface with M200PMB support. Compatible with OPAL 159+159 and CLIP 99+99 protocol.
    V.A.T. included
    154.48 €
    NOTIFIER® Isolator Module [M700X]
    NOTIFIER® Isolator Module
    Ref.: M700X
    Insulator module for protection of analogical loop short circuit. M700X module includes a insulator circuit that, in case of anomaly detection or loop short circuit, isolate the zone comprised between two insulator modules and protect the rest of the installation to stay operative. It is restored automatically when the anomaly disappeared in the loop. Its recommended to install a M700X each 20 devices. Allows surface mounting with M200SMB or SMB6-V0 box. DIN standard guide through M200E-DIN support or in any other surface with M200PMB support.
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module with 1 Output - 240VCA [M701-240]
    NOTIFIER® Monitor Module with 1 Output - 240VCA
    Ref.: M701-240
    Directionable control module able to do activation/desactivation of manoeuvre through communication loop systems that works with 240VCA tension, through NA/NC voltage free tension. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159).
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module with 1 Output - 240VCA [M701-240-DIN]
    NOTIFIER® Monitor Module with 1 Output - 240VCA
    Ref.: M701-240-DIN
    Directionable control module able to do activation/desactivation of manoeuvre through communication loop systems that works with 240VCA tension, through NA/NC voltage free tension. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159). For DIN standard guide mounting.
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module for Conventional Zones [M710-CZ]
    NOTIFIER® Monitor Module for Conventional Zones
    Ref.: M710-CZ
    Directionable monitor module with 1 supervised input circuit without final line resistor for monitoring of 2 threads conventionals detectors and intrinsic security detectors. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB.
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module with 1 Output [M701E]
    NOTIFIER® Monitor Module with 1 Output
    Ref.: M701E
    Directionable control module for activation of signal systems, doors, fire dampers, solenoids,etc...Provides 1 configurable output circuit, throughmicroswitch, as supervised output with RFL or in relay with voltage free contact. Includes isolator circuit, LED for status indications from the module and dedicated direction selector (01-159). Allows suface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN or any other type of surface with M200PMB support. Compatible with OPAL 159+159 and CLIP 99+99 protocols.
    V.A.T. included
    116.31 €
    NOTIFIER® Monitor Module with 1 Input [M710E]
    NOTIFIER® Monitor Module with 1 Input
    Ref.: M710E
    Directionable monitor module with 1 supervised input circuit for monitoring of alarm devices or technical signal that provides voltage free contact. Includes a isolator circuit of loop short circuit, LED for status indication from the module and a dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB support. Compatible with OPAL 159+159 and 99+99 CLIP protocol.
    V.A.T. included
    101.76 €
    NOTIFIER® Monitor Module for Conventional Zones with Resistance [M710-CZR]
    NOTIFIER® Monitor Module for Conventional Zones with Resistance
    Ref.: M710-CZR
    Directionable monitor module with 1 supervised input circuit with final line resistor for monitoring of 2 threads conventionals detectors and intrinsic security detectors. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB.
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module with 2 Inputs [M720E]
    NOTIFIER® Monitor Module with 2 Inputs
    Ref.: M720E
    Directionable monitor module with 2 supervised input circuits for monitoring of alarm devices or technical signal that provides voltage free contact. Includes a isolator cicuit of loop short circuit, LEDs for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB. Compatible with OPAL 159+159 and 99+99 CLIP protocol.
    V.A.T. included
    123.57 €
    NOTIFIER® Mini Monitor Module [NFX-MM1M]
    NOTIFIER® Mini Monitor Module
    Ref.: NFX-MM1M
    Mini directionable monitor module with 1 supervised input circuit for monitorisation of alarm devices or technic signal that provides voltage-free contact. Its connected directly to a analogical communicaction loop. Incorporates decadic direction (01-159)
    V.A.T. included
    112.68 €
    HONEYWELL™ IP/CRA Communication Module [UCIP]
    HONEYWELL™ IP/CRA Communication Module
    Ref.: UCIP
    Universal TCP-IP communicator for management system or central alarm receiver NFS-SUPRA, ID60, ID3000 and AM8200. Connection to up to 2 receivers with encrypted communication according to AES 128 level 4 standard on CONTACT ID. Transmission of events by zone or point. Direct connection to Ethernet NETWORK. Monitoring plot and periodic stay alive. Connection to the RS-232 port of the control panel. Complies with EN54 / 21 and EN50136 Grade 4. Requires 24 VDC power and SMBT box.
    V.A.T. included
    576.72 €
    HONEYWELL™ IP / ARC Communications Module by MODBUS [UCIP-MODBUS]
    HONEYWELL™ IP / ARC Communications Module by MODBUS
    Ref.: UCIP-MODBUS
    CRA communications module with IP connection by Unidirectional ModBus. Compatible with AM-8200, conventional NFS-Supra and Rp1r-Supra Extinguishing control panels.
    V.A.T. included
    1,765.56 €
    Protocol Converter for NOTIFIER® Panel to Modbus BACnet [IBOX-BAC-NID3000]
    Protocol Converter for NOTIFIER® Panel to Modbus BACnet
    Ref.: IBOX-BAC-NID3000
    Gateaway that convert ID3000 panel protocol to BACnet IP using ANSI X3.4 standard characters. Permit to monitor a unique panel with 8 loops each one with up to 99 sensors + 99 modules and 255 zones. Requires 24Vdc (150mA) and RS232 port available in ID3000 panel (Its recommended RS232 port for 020-478 card).
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net64C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net64C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 63 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net32C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net32C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 32 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net16C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net16C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 16 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net5C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net2C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net2C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 2 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-NID3K]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-NID3K
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved