English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    UTC™ Extension Pipe For FDD710, 1.5 m [FDD710LP]
    UTC™ Extension Pipe For FDD710, 1.5 m
    Ref.: FDD710LP
    The 1.5m extra-long sampling pipe is used with the FDD710 duct detector. It allows sampling in ducts that are too large for the 600mm sampling pipe normally supplied. The pipe may be cut to get an exact fit into the duct.
    V.A.T. included
    69.35 €
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector [DP652L]
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector
    Ref.: DP652L
    The detector sensor consists of 2 cambers - an open outer chamber and a semi-sealed reference chamber. As smoke enters the open chamber, the voltage difference between the chambers is measured and compared to a pre-set trigger level for alarm. An integrating ionisation detector, suitable for use in areas where transient levels of smoke may be present, is also available.
    V.A.T. included
    59.56 €
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector [DP652]
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector
    Ref.: DP652
    The detector sensor consists of 2 cambers - an open outer chamber and a semi-sealed reference chamber. As smoke enters the open chamber, the voltage difference between the chambers is measured and compared to a pre-set trigger level for alarm. An integrating ionisation detector, suitable for use in areas where transient levels of smoke may be present, is also available.
    V.A.T. included
    49.57 €
    UTC™ Aritech™ Surface Mount Conduit Box For Fire Detector Bases [DB806]
    UTC™ Aritech™ Surface Mount Conduit Box For Fire Detector Bases
    Ref.: DB806
    The DB806 is a versatile accessory for surface mounting fire detector bases. It was specifically designed to be used with 600, 860, 900 and 2000 series detectors, but may be used with most industry standard fire detector bases.
    V.A.T. included
    6.20 €
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Relay Output [DP721RT]
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Relay Output
    Ref.: DP721RT
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    76.50 €
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Remote Indicator Output [DP721T]
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Remote Indicator Output
    Ref.: DP721T
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    61.94 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 70°C Class B [DT713-7]
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 70°C Class B
    Ref.: DT713-7
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified. The DT713-7 is a class B temperature detector with a fix temperature threshold of 70°C and built in rate-or-rise functionality.
    V.A.T. included
    51.45 €
    Base for Intrinstically Safe Detectors [YBN-R/4IS(WHT)]
    Base for Intrinstically Safe Detectors
    Ref.: YBN-R/4IS(WHT)
    The YBN-R/4IS(WHT) is a WHITE conventional detector mounting base associated with the conventional range of intrinsically safe detectors which is fully compatible with the majority of existing conventional fire alarm control panels. The YBN-R/4IS(WHT) is supplied with square cable clamps for secure and reliable cable termination. Note that this base does not provide line continuity during detector removal (head out support). If manual call points are therefore being used, then these should be wired onto the zone first.
    V.A.T. included
    24.31 €
    UTC™ High Temperature Thermal Probe [ST802]
    UTC™ High Temperature Thermal Probe
    Ref.: ST802
    High temperature thermic detector by thermal probe with electrical interlock, adjustable temperature from 50 to 300ºC, Dimensions: 140 x 100 x 70 mm, grey color. Can be connected directly to any UTC fire detection central and automatical reset.
    V.A.T. included
    182.25 €
    UTC™ High Temperature Thermal Probe [ST801]
    UTC™ High Temperature Thermal Probe
    Ref.: ST801
    High temperature thermic detector by thermal probe with electrical interlock, adjustable temperature from 50 to 300ºC, Dimensions: 140 x 100 x 70 mm, grey color. Can be connected directly to any UTC fire detection central.
    V.A.T. included
    189.01 €
    KILSEN® Intrinsically Safe Conventional Smoke Detector [SLR-E-IS(WHT)]
    KILSEN® Intrinsically Safe Conventional Smoke Detector
    Ref.: SLR-E-IS(WHT)
    Conventional intrinsically safe smoke detector. Requires YBN-R/4IS(WHT) base. Certified DoP and CE.
    V.A.T. included
    194.88 €
    KILSEN® Fire Detection Conventional Base with Relay [KZ705R]
    KILSEN® Fire Detection Conventional Base with Relay
    Ref.: KZ705R
    Connection base with a relay output for all KL700 range detectors, includes anti-theft head system, stainless steel contacts, ground contact for screen connection, ABS material in white color.
    V.A.T. included
    27.08 €
    KILSEN® Thermovelocimetric Detector [KL710]
    KILSEN® Thermovelocimetric Detector
    Ref.: KL710
    Conventional thermovelocimetric detector, double LED indicator with total vision and a output for remote controller, anti-theft head system and stainless steel contacts. Requires KZ700 base, not included. Certified: CE and CPR (EN54 part 5).
    V.A.T. included
    19.88 €
    Connection Base for All KILSEN® 700 Series Detectors - Black [KZ700B]
    Connection Base for All KILSEN® 700 Series Detectors - Black
    Ref.: KZ700B
    Connection base for all KL700 and KL700A range detectors, includes anti-theft head system, stainless metal contact. Irregular roof fixing system, low perfil, ABS material in white color.
    V.A.T. included
    7.20 €
    Connection Base for All KILSEN® 700 Series Detectors [KZ700]
    Connection Base for All KILSEN® 700 Series Detectors
    Ref.: KZ700
    Connection base for all KL700 and KL700A range detectors, includes anti-theft head system, stainless metal contact. Irregular roof fixing system, low perfil, ABS material in white color.
    V.A.T. included
    4.74 €
    KILSEN® Conventional Optic Detector - Black [KL731B]
    KILSEN® Conventional Optic Detector - Black
    Ref.: KL731B
    Conventional optic smoke detector with double LED indicator with total vision for remote controller, optic removable and replaceable camera, automatic calibration with user. Anti-theft head system, rid microphone with protection for dirty environments and stainless steel contacts. Requires KZ700 base, not included. Certified CE and CPR (EN54 Part 7).
    V.A.T. included
    58.14 €
    KILSEN® Inclemency Thermic Conventional Detector [6297]
    KILSEN® Inclemency Thermic Conventional Detector
    Ref.: 6297
    IP67 Conventional inclemency detectors, fixed temperature of 87ºC, Class CS (Ex II 3GD EEx nA II T5). Includes base with pipe input.
    V.A.T. included
    372.11 €
    KILSEN® Conventional Optic Detector [KL731]
    KILSEN® Conventional Optic Detector
    Ref.: KL731
    Conventional optic smoke detector with double LED indicator with total vision for remote controller, optic removable and replaceable camera, automatic calibration with user. Anti-theft head system, rid microphone with protection for dirty environments and stainless steel contacts. Requires KZ700 base, not included. Certified CE and CPR (EN54 Part 7).
    V.A.T. included
    27.35 €
    KILSEN® Intrinsically Safe Conventional Detector [DCD-1E-IS(WHT)]
    KILSEN® Intrinsically Safe Conventional Detector
    Ref.: DCD-1E-IS(WHT)
    Conventional intrinsically safe detector with EEX1A11CT5 (55C) operating temperature range. Requires YBN-R/4IS(WHT) base. Certified DoP and CE.
    V.A.T. included
    174.39 €
    UTC™ Aritech™ Analogic Optical Detector Head [DP2061N]
    UTC™ Aritech™ Analogic Optical Detector Head
    Ref.: DP2061N
    Algorithmic analogic optical smoke detector head for Aritech™ analogic panels, with microprocessor, removable and replaceable optical camera, micro protection grid for dirty environments, algorithmic compensation of dirt and algorithm to improve the robustness against electromagnetic interference, double indicator LED with total view and exit for remote pilot, system anti theft of the head, stainless steel contacts, white ABS material. Complete self-diagnosis Precise DB200X base socket, not included. Certificates: CE and CPR (EN54 part 7).
    V.A.T. included
    58.66 €
    UTC™ Aritech™ Analogic Thermovelocimetric Detector Head [DT2063N]
    UTC™ Aritech™ Analogic Thermovelocimetric Detector Head
    Ref.: DT2063N
    Algorithmic analogic thermovelocimetric + heat detector head, for Aritech™ analogic panels, with microprocessor, real-time temperature reading, dual indicator LED with total vision, remote pilot output, white ABS material. Complete self-diagnosis. Requires DB200X base socket, not included. Certificates: CE and CPR (EN54 part 5).
    V.A.T. included
    63.09 €
    UTC™ Aritech™ Analogic Optical + Temperature Detector Head [DP991T]
    UTC™ Aritech™ Analogic Optical + Temperature Detector Head
    Ref.: DP991T
    Multi-criteria (optical smoke and temperature) analogical detector head, 990 series, for Aritech™ analogical panels. Microprocessor, double led indicator with total vision. Anti-theft head system, stainless steel contacts, white ABS material. Precise base DB950, not included. Certificates: CE and CPR (EN54 parts 5 and 7).
    V.A.T. included
    94.23 €
    UTC™ Aritech™ Analogic Optical Detector Head [DP991]
    UTC™ Aritech™ Analogic Optical Detector Head
    Ref.: DP991
    Analogical optical smoke detector head, 990 series, for Aritech™ analogical panels. Microprocessor, algorithmic compensation of dirt and double led. Anti-theft head system, stainless steel contacts, white ABS material. Precise base DB950, not included. Certificates: CE and CPR (EN54 part 7).
    V.A.T. included
    81.00 €
    UTC™ Aritech™ Analogic CO + Thermovelocimetric Detector Head [DT992CO]
    UTC™ Aritech™ Analogic CO + Thermovelocimetric Detector Head
    Ref.: DT992CO
    Analogical detector head (thermovelocimetric and CO), 990 series, for Aritech™ analogic panels. It has 5 modes of operation depending on the temperature and CO sensitivity required. The temperature and CO alarms are treated independently. Requires DB950 base, not included. Certificates: CE and CPR (EN54 part 5).
    V.A.T. included
    182.35 €
    SYSAWAY© 2024 All rights reserved