English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    Conventional UTC™ GST® Control Panel, 16 Zones [GST116A]
    Conventional UTC™ GST® Control Panel, 16 Zones
    Ref.: GST116A
    This Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 & EN54-4 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch. Connecting with conventional detectors and manual call points, generating alarm in case of fire, to save human life. Every detection zone can have at most 15 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32. The A series panel is an upgrading version of previous GST100 series conventional panel. New designed front fascia, printed circuit board and simplified operations make it more reliable, stable and convenience to use.
    V.A.T. included
    691.03 €
    UTC™ Aritech™ 1 Zone Monitoring Module (Up to 30 Detect.) Conventional [IU2055NC]
    UTC™ Aritech™ 1 Zone Monitoring Module (Up to 30 Detect.) Conventional
    Ref.: IU2055NC
    One zone monitor module to control up to 20 conventional detectors or push buttons. It discriminates pushbutton and detector on the control panel display, discriminates breakdown due to cut or short circuit, occupies an address in the loop and is powered by it. Status indicator LED. It has a remote pilot output. Certificates: CE and CPR (EN54 part 18).
    V.A.T. included
    101.23 €
    UTC™ Aritech™ Isolator Module for Analogic Loop Protection [ISM-95]
    UTC™ Aritech™ Isolator Module for Analogic Loop Protection
    Ref.: ISM-95
    Short circuit protection isolator module in the analogical loop, with status indicator LED, which isolates the area between two isolators, in the event of a short circuit in the loop. It does not take direction in the loop. Certificates: CE and CPR (EN54 part 17).
    V.A.T. included
    49.82 €
    UTC™ Aritech™ 1 Output 24V Control Module (3Amp Max.) [IU2080NC]
    UTC™ Aritech™ 1 Output 24V Control Module (3Amp Max.)
    Ref.: IU2080NC
    24V output control module (3A max.) Supervised for alarm sirens or maneuvers that require a 24Vdc power supply, discriminating the cut fault or short circuit on said line, occupies an address in the loop, requires 24Vdc power. not resettable. Status indicator LED. It has a fault relay output. Certificates: CE and CPR (EN54 part 18).
    V.A.T. included
    131.42 €
    1-Input UTC™ Aritech™ Supervised Module [IU2050NC]
    1-Input UTC™ Aritech™ Supervised Module
    Ref.: IU2050NC
    New module of a technical alarm input with supervision of the line, with connection of an NO contact, occupies an address in the loop and gets voltage from it. Led status indicator. CE and CPR certificates (EN54 part 18).
    V.A.T. included
    79.44 €
    UTC™ Aritech™ 4I/4O Analog Control Module [IO2034NC]
    UTC™ Aritech™ 4I/4O Analog Control Module
    Ref.: IO2034NC
    Module with four alarm inputs and four relay outputs (2A 24Vdc). The technical inputs have line supervision, with connection of a NO contact, occupies an address in the loop and is powered by it. Status indicator LED. Certificates: CE and CPR (EN54 part 18).
    V.A.T. included
    128.61 €
    UTC™ Aritech™ Monitoring Module for 1 Via Radio Zone (Up to 30 Detect.) [II933IRF]
    UTC™ Aritech™ Monitoring Module for 1 Via Radio Zone (Up to 30 Detect.)
    Ref.: II933IRF
    One-zone monitor module for the connection of up to 30 devices via radio of the 930 series for Aritech™ analogue panels. Includes isolator. Frequency 868Mhz. Voltage directly from the loop. Maximum 5 modules per loop. Integrated monitoring screen. Dimensions 190 x 132 x 50 mm. Certificates: CE and CPR (EN54 parts 18 and 25).
    V.A.T. included
    1,103.24 €
    Small Cover for UTC™ Aritech™ Panels [2010-2T-FM-S]
    Small Cover for UTC™ Aritech™ Panels
    Ref.: 2010-2T-FM-S
    cover for semi-recessed analogical 2X panels, small box.
    V.A.T. included
    232.49 €
    UTC™ Aritech™ Rack Mount Kit (Small) [2010-2T-19-S]
    UTC™ Aritech™ Rack Mount Kit (Small)
    Ref.: 2010-2T-19-S
    Analog control panels: kit for mounting in a rack, the control panels in a small box.
    V.A.T. included
    303.06 €
    UTC™ Aritech™ Rack Mount Kit [2010-2T-19]
    UTC™ Aritech™ Rack Mount Kit
    Ref.: 2010-2T-19
    Analog control panels: kit for mounting in a rack.
    V.A.T. included
    320.69 €
    Large Cover for UTC™ Aritech™ Panels [2010-2T-FM]
    Large Cover for UTC™ Aritech™ Panels
    Ref.: 2010-2T-FM
    Cover for semi-recessed analogical 2X panels, large box. Dimensions: 595 x 488 x 62 mm.
    V.A.T. included
    250.07 €
    UTC™ Aritech™ 24 Zone Interface Card [2X-ZI-24-S]
    UTC™ Aritech™ 24 Zone Interface Card
    Ref.: 2X-ZI-24-S
    Indicator card of 24 zones with 48 LEDs (breakdown and alarm by zone).
    V.A.T. included
    147.52 €
    UTC™ Aritech™ 40 Zone Interface Card [2X-ZI-40]
    UTC™ Aritech™ 40 Zone Interface Card
    Ref.: 2X-ZI-40
    Indicator card of 40 zones with 80 LEDs (breakdown and alarm by zone).
    V.A.T. included
    184.42 €
    RS2332 interface for UTC™ Aritech™ Panels [2010-2-232-KIT]
    RS2332 interface for UTC™ Aritech™ Panels
    Ref.: 2010-2-232-KIT
    RS232 communication kit for analogical panels.
    V.A.T. included
    205.66 €
    Transmisor de Alarma Digital UTC™ Aritech™ [2010-2-DACT]
    Transmisor de Alarma Digital UTC™ Aritech™
    Ref.: 2010-2-DACT
    Digital alarm transmitter for panels of the KFP-AF series through a telephone line (RTC / PSTN).
    V.A.T. included
    419.97 €
    1 Loop Extension Card for UTC™ Aritech™ Analog Panels [2X-LB]
    1 Loop Extension Card for UTC™ Aritech™ Analog Panels
    Ref.: 2X-LB
    Extension card with two loops for the 2X-F2-09 panel. Provides 4 programmable outputs. The card is connected directly to the chassis of the control panel without the need for additional wiring.
    V.A.T. included
    639.44 €
    UTC™ Aritech™ 20 Zone Interface Card [2X-ZI-20]
    UTC™ Aritech™ 20 Zone Interface Card
    Ref.: 2X-ZI-20
    Indicator card of 20 zones with 40 LEDs (breakdown and alarm by zone).
    V.A.T. included
    147.52 €
    Network Card for UTC™ Aritech™ Panels [2010-2-NB]
    Network Card for UTC™ Aritech™ Panels
    Ref.: 2010-2-NB
    Network card for 2010 series panel that allows you to create a network of analog and conventional panels (class A / B), with a maximum of 32 nodes / 32 loops / 64 zones.
    V.A.T. included
    376.09 €
    KILSEN® Directionable Module for Fire Doors Control [KAL790]
    KILSEN® Directionable Module for Fire Doors Control
    Ref.: KAL790
    Module for NA contact input and a voltage free output relay (C, NC, NA) for retainers and floodgates control, occupies one direction in the alarm loop and requires 24VDC power supply not resettable. Includes LED status indicatod. IP55. Dimensions: 150x110x70mm. Certifications: CE and CPR (EN54 part 18).
    V.A.T. included
    139.10 €
    KILSEN® Loop Insulator Module [KAL775]
    KILSEN® Loop Insulator Module
    Ref.: KAL775
    Insulator module for short-circuit protection in analogical link, with LED status indicator, that insulate the zone between two insuladors, in case of short circuit in the link. No occupies directions in the alarm loop. IP55. Dimensions: 100x100x50mm. Certifications: CE and CPR (EN54 part 17).
    V.A.T. included
    90.97 €
    KILSEN® Directionable Module with 1 Logic Input [KAL760]
    KILSEN® Directionable Module with 1 Logic Input
    Ref.: KAL760
    Technical alarm input module with 2 alarm levels and line monitoring, with NA or NC contact connection, occupies one direction in the alarm loop, direct power supply by the link. Includes LED status indicator. IP55. Dimensions: 150x110x70mm. Certifications:CE and CPR (EN54 part 18).
    V.A.T. included
    109.08 €
    KILSEN® Directionable Module with a Monitored Output Relay [KAL740]
    KILSEN® Directionable Module with a Monitored Output Relay
    Ref.: KAL740
    Módulo de control de salida de 24VDC supervisados, para sirenas de alarma o maniobras que precisen alimentación de 24VDC, discriminando la avería de corte o corto circuito en dicha línea, occupies one direction in the alarm loop, precisa alimentación 24 VDC. Consumo máximo 100mA. Incorpora led indicador de estado. IP55. Dimensiones: 150x110x70mm. Certifications: CE y CPR (EN54 parte 18).
    V.A.T. included
    155.99 €
    KILSEN® Directionable Module with 4 Output Relays [KAL734C]
    KILSEN® Directionable Module with 4 Output Relays
    Ref.: KAL734C
    Output control module with four voltage free relay that provides NA/C/NC contact (1,2A , 24VDC) by relay, programmable from the panel, occupies four directions in the alarm loop, requires 24VDC power supply. Maximum consumption: 100mA. Includes LED status indicator. IP55. Dimensions: 190x140x70mm. Certifiactions: CE and CPR (EN54 part 18).
    V.A.T. included
    194.94 €
    KILSEN® 700 Series Module with a Directionable Output Relay [KAL730]
    KILSEN® 700 Series Module with a Directionable Output Relay
    Ref.: KAL730
    Output control module with voltage free relay that provide a NA/C/NC contact (1, 2A, 24VDC) programmable from the panel, occupies one direction in the alarm loop, requires 24VDC power supply. Maximum consumption: 30mA. Includes LED status indicator. IP55. Dimensions: 150x110x70mm. Certification: CE and CPR (EN54 part 17).
    V.A.T. included
    119.27 €
    SYSAWAY© 2024 All rights reserved