English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    Standard XTRALIS™ OSID transmitter Powered at 24VDC [OSE-SPW]
    Standard XTRALIS™ OSID transmitter Powered at 24VDC
    Ref.: OSE-SPW
    Standard power emitting device with wired power for operation with OSI-10 and OSI-90. Requires 12/24VDC power from a power source conforming to EN54/4. Compatible with OSI-10 or OSI-90.
    V.A.T. included
    455.19 €
    XTRALIS™ Linear OSID Receiver with 80° Field of View [OSI-90]
    XTRALIS™ Linear OSID Receiver with 80° Field of View
    Ref.: OSI-90
    80° OSID receiver for up to 7 transmitters and distances of 6m to 36m using standard power transmitters and 12m to 68m with high power transmitters OSE-HPW or 50m with OSE-HP-01. Requires 12/24VDC power from a power source conforming to EN54/4.
    V.A.T. included
    1,215.25 €
    XTRALIS™ Linear OSID Receiver with 7° Field of View [OSI-10]
    XTRALIS™ Linear OSID Receiver with 7° Field of View
    Ref.: OSI-10
    OSID receiver 7° coverage of 30m up to 150m range. Compatible with OSE-SPW and OSE-SP-01 Distance from 30 to 150 m with OSE-SP-01/W. Requires 12/24VDC power from a power source conforming to EN54/4.
    V.A.T. included
    1,029.54 €
    HONEYWELL™ FSL Detector Test Lamp - Unclassified [FSL100-TL]
    HONEYWELL™ FSL Detector Test Lamp - Unclassified
    Ref.: FSL100-TL
    Test lamp for FSL detectors, includes universal charger and carrying case. For unclassified areas.
    V.A.T. included
    Consult
    Support for HONEYWELL™ FSL Detectors [FSL100-SM21]
    Support for HONEYWELL™ FSL Detectors
    Ref.: FSL100-SM21
    Ball joint mount for mounting FSL detectors.
    V.A.T. included
    463.15 €
    HONEYWELL™ Fire Sentry 3IR Flame Detector [FSL100-IR3]
    HONEYWELL™ Fire Sentry 3IR Flame Detector
    Ref.: FSL100-IR3
    3IR flame detector with frequency analysis of flame flickering to avoid false alarms, suitable for liquid hydrocarbons and dirty fires. Especially suitable for fires with smoke. Resistant against influences of lights, arcs and electric shocks, electric welding (more than 3 meters). Requires 24V power. Reach 35 m with an angle of +/- 90 H-V. Housing: Fiberglass reinforced polyester (GRP). Not flammable UV resistant, Self-extinguishing V – 0 (UL-94). Dimensions A: 125 mm H: 80 mm F: 57 mm. IP protection: IP65.
    V.A.T. included
    4,408.74 €
    HONEYWELL™ Fire Sentry UV/IR Flame Detector (ATEX Zone 2/22) [FSL100-UVIR]
    HONEYWELL™ Fire Sentry UV/IR Flame Detector (ATEX Zone 2/22)
    Ref.: FSL100-UVIR
    UV / IR flame detector suitable for indoor applications, such as fume hoods and hydrogen storage areas, effective for materials that burn at low temperatures. Requires 24V power. Reach 25 m with an angle of +/- 90 H-V. Housing: Fiberglass reinforced polyester (GRP). Not flammable UV resistant Self-extinguishing V – 0 (UL-94). Dimensions A: 125 mm H: 80 mm F: 57 mm. IP protection: IP65.
    V.A.T. included
    3,438.20 €
    HONEYWELL™ Fire Sentry UV Flame Detector [FSL100-UV]
    HONEYWELL™ Fire Sentry UV Flame Detector
    Ref.: FSL100-UV
    UV flame detector suitable for indoor applications, such as fume hoods and hydrogen storage areas, effective for materials that burn at low temperatures. Requires 24V power. Reach 25 m with an angle of +/- 90 H-V. Housing: Fiberglass reinforced polyester (GRP). Not flammable UV resistant Self-extinguishing V – 0 (UL-94). Dimensions A: 125 mm H: 80 mm F: 57 mm. IP protection: IP65.
    V.A.T. included
    3,581.27 €
    Swivel Bracket for Compact Flame Detectors [20/20-005]
    Swivel Bracket for Compact Flame Detectors
    Ref.: 20/20-005
    Stainless steel support with adjustable ball joint to hold detectors of MINI range by SPECTREX.
    V.A.T. included
    445.84 €
    HONEYWELL™ Compact IR3 Flame Detector [20/20MI-11F]
    HONEYWELL™ Compact IR3 Flame Detector
    Ref.: 20/20MI-11F
    Compact flame detector IR3 certified CPD EN54-10, designed for fire detection with flame for industrial applications, indoors or outdoors. The Flame detector with triple infrared technology offers a two or three times bigger range that the detectors of unique technology UV and IR and mor immunity against possible false alarms, making a flame analysis in three infrared spectrum bands. Ideal for the detectionde of fires with hydrocarbon flame, such as gasoline, kerosene, gasoil, flight fuels such as JP4, hydraulic fluids, paint and solvents, monomers and polimers such as ethylene and polyethylene, gases. Incorporates relay output breakout and alarm circuits, 4-20 mA and interface RS485. Requires support for mounting (S20/20-005) and power AUX. of 24 VDC 40mA from a power supply according to EN54-4 standards. S20/20MI-1 detector can be found in ATEX EExia version.
    V.A.T. included
    7,427.27 €
    HONEYWELL™ Compact UV/IR Flame Dectector [20/20ML-11SF]
    HONEYWELL™ Compact UV/IR Flame Dectector
    Ref.: 20/20ML-11SF
    UV/IR compact detector designed for the detection of fires with flame for applications where CPR compliance is not required. Suitable for indoor and outdoor uses. Combined technology UV/IR flame detector incorporates the advantages of both technologies and makes it ideal for detection, in open spaces, of fire with hydrocarbon flame, hydroxide and hydrogen and metals or organic matters. Incorporates relay output alarm and breakout circuits , 4-20mA and interface RS485. Requires support for mounting (S20/20-005) and power supply AUX. of 24VDC 60mA of a power supply according to EN54-4 standards.
    V.A.T. included
    7,213.54 €
    UTC™ GST® Intelligent Ultraviolet Flame Detector [I-9104]
    UTC™ GST® Intelligent Ultraviolet Flame Detector
    Ref.: I-9104
    The I-9104 Intelligent Ultraviolet Flame Detector capable of detecting the ultraviolet (UV) rays emitted by a burning substance, ideal for areas where you would expect heat and smoke but not flames such as boiler and generator rooms, also suitable for high hazard applications such as petrochemical plants, munitions factories and other areas where flammable or explosive liquids or solids are handled or stored. The I-9104 sensor provides an ultraviolet photosensitive tube, with highly sensitive, reliable, dust-resistant, corrosion-proof and moisture-resistant qualities. The detector will initiate an alarm when a flame > 3cm is detected at a distance of up to 6 meters, with a total effective range of up to 12 meters.
    V.A.T. included
    193.61 €
    UTC™ GST® Intelligent Reflective Beam Detector [I-9105R]
    UTC™ GST® Intelligent Reflective Beam Detector
    Ref.: I-9105R
    I-9105R Intelligent Reflective Beam Detector works on the principle of reflective infrared beam smoke detector that can be directly connected to a fire alarm loop. Transmitting status information via the loop between the detector and controller. The detector must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector. Built-in intelligent microprocessor, the detector has strong ability of analysis and judgment. The detector automatically carries out system adjustment, compensation and variation of ambient data. Secure and speedy communication through the on board processor enables the detector to make its own decision, resulting in greater automation. The sensor and the panels utilized fuzzy logic providing an almost limitless cause and effect scenarios
    V.A.T. included
    816.27 €
    UTC™ Adjustable Mounting Bracket [FF705]
    UTC™ Adjustable Mounting Bracket
    Ref.: FF705
    A universal swivel mounting bracket for most FF700 flame detectors.
    V.A.T. included
    333.23 €
    UTC™ UV/IR Universal Test Torch [FF703]
    UTC™ UV/IR Universal Test Torch
    Ref.: FF703
    The FF703 is a microprocessor based flame simulator for the testing of UV or IR or UV-IR flame detectors. It eliminates the need to use a flame. This unit is designed to generate a wide range of optical output signals, including various channels of infra-red to test dual infra-red detectors. It can also emit "flickering" infra-red signal to test for false alarms.
    V.A.T. included
    5,053.08 €
    UTC™ ZITON® Flame Detector with IR3 Sensor and Fire Resistant Eexd-IIC T6 Housing [FF766]
    UTC™ ZITON® Flame Detector with IR3 Sensor and Fire Resistant Eexd-IIC T6 Housing
    Ref.: FF766
    ATEX Flame detector with triple infrared sensor (IR3). 90º detection cone. IP66 fire resistant case Eexd –IIC T6. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the close infrared (1 to 2,7um). Power supply 14-30VDC. Consumption: 20mA. Measures: 146x150x137 mm. Working temperature: -10ºC to 55ºC. Weight 2,5Kg.
    V.A.T. included
    5,671.05 €
    UTC™ ZITON® Flame Detector with IR3 Sensor, Intrinsically Safe and Zinc Alloy Casing [FF767]
    UTC™ ZITON® Flame Detector with IR3 Sensor, Intrinsically Safe and Zinc Alloy Casing
    Ref.: FF767
    Flame detector with triple infrared sensor (IR3). 90º detection cone. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarm. Spectral response in the infrared: 0,75 to 2,7um. Power supply 14-30VDC. Consumption: 20mA. Measures: 108x142x82mm. Weigh 2Kg. IP66 fire resistant case. ATEX Intrinsically safe.
    V.A.T. included
    Consult
    UTC™ ZITON® Flame Detector with Triple Infrared Sensor (IR3) and IP65 [FF762]
    UTC™ ZITON® Flame Detector with Triple Infrared Sensor (IR3) and IP65
    Ref.: FF762
    Flame detector with triple infrared sensor (IR3). 90º detection cone. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-30VDC. Consumption: 20mA. Measures: 108x142x82mm. Weight 2Kg. IP65 alloy zinc case.
    V.A.T. included
    4,733.81 €
    UTC™ ZITON® Doble Technology UV/IR Flame Detector with Zinc Alloy Casing [FF751]
    UTC™ ZITON® Doble Technology UV/IR Flame Detector with Zinc Alloy Casing
    Ref.: FF751
    Flame detector with double technology infrared sensors (IR2) and ultraviolet (UV: 185 to 260 nm). 90º detection cone and detection distance up to 45 metres. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA. IP65 zinc alloy case.
    V.A.T. included
    4,960.98 €
    UTC™ ZITON® Doble Technology UV/IR Flame Detector with Eexd-IIC T6 Explosion-Proof Casing [FF756]
    UTC™ ZITON® Doble Technology UV/IR Flame Detector with Eexd-IIC T6 Explosion-Proof Casing
    Ref.: FF756
    Flame detector with double technology infrared sensors (IR2) and ultraviolet (UV: 185 to 260 nm). 90º detection cone and detection distance up to 45 metres. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA. IP66 fire resistant case. ATEX intrinsically safe.
    V.A.T. included
    9,707.50 €
    UTC™ ZITON® IR Flame Detector with Eexd-IIC T6 Explosion-Proof Casing [FF746]
    UTC™ ZITON® IR Flame Detector with Eexd-IIC T6 Explosion-Proof Casing
    Ref.: FF746
    Flame detector ATEX with double infrared sensor (IR2).90º detection cone and detection distance up to 45 metres. IP66 Eexd –IIC T6 fire resistant case. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA.
    V.A.T. included
    5,249.56 €
    UTC™ ZITON® IR2 Flame Detector with Intrinsically Safe Zinc Alloy Casing [FF747]
    UTC™ ZITON® IR2 Flame Detector with Intrinsically Safe Zinc Alloy Casing
    Ref.: FF747
    Flame detector with double infrared sensor (IR2). 90º Detection cone and detection distance up to 45 metres. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA. IP66 fire resistant case. ATEX Intrinsically safe.
    V.A.T. included
    4,898.95 €
    UTC™ ZITON® Dual (IR2) Flame Detector with Zinc Alloy Casing [FF742]
    UTC™ ZITON® Dual (IR2) Flame Detector with Zinc Alloy Casing
    Ref.: FF742
    Flame detector with double infrared sensor (IR2). 90º Detection cone and detection distance up to 45 metres. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA. IP65 zinc alloy case.
    V.A.T. included
    4,632.30 €
    HONEYWELL™ MorleyIAS® 40 Meter Analog Beam Detector [MI-LPB2-S3I-40]
    HONEYWELL™ MorleyIAS® 40 Meter Analog Beam Detector
    Ref.: MI-LPB2-S3I-40
    Analog smoke detection barrier by reflection of infrared light beam. Maximum capacity 40 m.
    V.A.T. included
    1,188.10 €
    SYSAWAY© 2024 All rights reserved