English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    UTC™ ZITON® IR2 Flame Detector with Intrinsically Safe Zinc Alloy Casing [FF747]
    UTC™ ZITON® IR2 Flame Detector with Intrinsically Safe Zinc Alloy Casing
    Ref.: FF747
    Flame detector with double infrared sensor (IR2). 90º Detection cone and detection distance up to 45 metres. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA. IP66 fire resistant case. ATEX Intrinsically safe.
    V.A.T. included
    Consult
    UTC™ ZITON® Dual (IR2) Flame Detector with Zinc Alloy Casing [FF742]
    UTC™ ZITON® Dual (IR2) Flame Detector with Zinc Alloy Casing
    Ref.: FF742
    Flame detector with double infrared sensor (IR2). 90º Detection cone and detection distance up to 45 metres. Low consumption (8mA). Incorporates relay output. Programmable sensitivity. Incorporates filters and analysis through microprocessor to delete false alarms. Spectral response in the infrared: 1 to 2,7um. Power supply 14-28VDC. Consumption: 20mA. IP65 zinc alloy case.
    V.A.T. included
    Consult
    HONEYWELL™ MorleyIAS® 40 Meter Analog Beam Detector [MI-LPB2-S3I-40]
    HONEYWELL™ MorleyIAS® 40 Meter Analog Beam Detector
    Ref.: MI-LPB2-S3I-40
    Analog smoke detection barrier by reflection of infrared light beam. Maximum capacity 40 m.
    V.A.T. included
    Consult
    HONEYWELL™ MorleyIAS® 70 Meter Analog Beam Detector [MI-LPB2-S3I]
    HONEYWELL™ MorleyIAS® 70 Meter Analog Beam Detector
    Ref.: MI-LPB2-S3I
    Analog smoke detection barrier by reflection of infrared light beam. Maximum capacity 70m.
    V.A.T. included
    Consult
    HONEYWELL™ Kit 100m Ranging for F5000 Linear Detector [F5000-LRK]
    HONEYWELL™ Kit 100m Ranging for F5000 Linear Detector
    Ref.: F5000-LRK
    Long range kit. Includes 3 reflectors to form a combination of four included with the F5000M detector. Must be used when the distance between transmitter/reflector and reflector is from 50 to 100 m.
    V.A.T. included
    Consult
    Support for HONEYWELL™ F5000 Linear Detectors [F5000-MMK]
    Support for HONEYWELL™ F5000 Linear Detectors
    Ref.: F5000-MMK
    Support for multiple mounting which allows the installation of the F5000M or F5000S detector in oblicuous walls or ceilings with an angle superior to 10º.
    V.A.T. included
    Consult
    HONEYWELL™ Support for Mounting Surface [F3000-SMK]
    HONEYWELL™ Support for Mounting Surface
    Ref.: F3000-SMK
    Accesory for mounting of the transmitter and receivers in surface for the F3000 barriers.
    V.A.T. included
    Consult
    HONEYWELL™ Support for Oblique Surfaces [F3000-MMK]
    HONEYWELL™ Support for Oblique Surfaces
    Ref.: F3000-MMK
    Support for mounting the transmitters and receivers of the F3000 barriers in oblicuous surfaces . Has 360 degree rotation plus 180 degrees setting.
    V.A.T. included
    Consult
    Heater for HONEYWELL™ Reflectors [BEAMHKR]
    Heater for HONEYWELL™ Reflectors
    Ref.: BEAMHKR
    Heating circuit to connect to the reflector of the NFXI-BEAM barrier.Increases to some degrees the temperature of the detector to avoid condensation . To mount in the back of the detector. BEAM-HKR by reflector needed.
    V.A.T. included
    Consult
    Heater for HONEYWELL™ NFXI-BEAM Detector [BEAMHK]
    Heater for HONEYWELL™ NFXI-BEAM Detector
    Ref.: BEAMHK
    Heating circuit to connect to the barrier of the NFXI-BEAM series. Increases to some degrees the temperature of the detector to avoid condensation. To mount inside the barrier.
    V.A.T. included
    Consult
    HONEYWELL™ Metal Support for Installation [6500-MMK]
    HONEYWELL™ Metal Support for Installation
    Ref.: 6500-MMK
    Metal support of black colour for multiple mounting which allows the installation of the 6500 linear detectors, NFXI-BEAM and MI-LPB2 in oblicuous ceilings and walls with an angle superior to 10°. Can be mounted in the unit with transmitter/receiver or in the reflector. Requires 6500-SMK kit for surface mounting. Not compatible with 6500-LRK long range kit.
    V.A.T. included
    Consult
    HONEYWELL™ Reflector for Linear Smoke Detectors [6500-LRK]
    HONEYWELL™ Reflector for Linear Smoke Detectors
    Ref.: 6500-LRK
    Long range kit which consists of three reflectors to form a combination of four included with the three linear 6500 detectors, NFXI-BEAM y MI-LPB2. Must be used when the distance between transmitter/reflector and reflector is from 70 to 100 metres.
    V.A.T. included
    Consult
    HONEYWELL™ Smoke Detection Barrier (ATEX) [3000-115 (HON)]
    HONEYWELL™ Smoke Detection Barrier (ATEX)
    Ref.: 3000-115 (HON)
    Linear smoke detection barrier for conventional systems. Composed of transmitter, independent receiver and control unit with LCD display. Ideal for protecting large areas and spaces with very high ceilings where the structure has reflective surfaces. It has the option of adding a transmitter + receiver set to be monitored from the same control unit. It incorporates automatic dirt compensation circuit, alarm and fault relay output circuit and status indicator LED. Requires 12 / 24Vdc power from a power source conforming to EN54-4. Special ATEX areas.
    V.A.T. included
    Consult
    HONEYWELL™ Surface Mounting Kit [6500-SMK]
    HONEYWELL™ Surface Mounting Kit
    Ref.: 6500-SMK
    Kit for surface mounting of the transmitter/receiver of the 6500 linear detectors, NFXI-BEAM and MI-LPB2 to provide an additional depth of 43 mm, facilitate surface mounting and allowing the cable's entrance by the side.
    V.A.T. included
    Consult
    HONEYWELL™ IR Linear Smoke Detector (Max. 40 Meters) [NFXI-BEAM-40-E]
    HONEYWELL™ IR Linear Smoke Detector (Max. 40 Meters)
    Ref.: NFXI-BEAM-40-E
    Analog smoke detection barrier by infrared light beam reflection for analogue exchanges. Composed of emitter and receiver mounted on the same unit and a reflector element. It connects directly to the analog communications loop and feeds on the loop itself, addressing from 01 to 159. Easy alignment, indicating the value of the received signal in two 7-segment displays. It incorporates compensation for dirt, three status LEDs and short circuit isolator. A 200 x 230 mm reflector is included for distances of 10 to 40 m. Ideal for the protection of large-scale warehouses and spaces with very high ceilings. It includes test filters.
    V.A.T. included
    Consult
    HONEYWELL™ Motor Driven Bangle Barrier for Linear Smoke Detection MorleyIAS® Conventional [F5000S]
    HONEYWELL™ Motor Driven Bangle Barrier for Linear Smoke Detection MorleyIAS® Conventional
    Ref.: F5000S
    Linear smoke detector by IR beam, motorized slave. Does not incorporate control unit. Only 1 F5000S slave can be connected to F5000M master barrier, as well as the detector which is already included in the combination.
    V.A.T. included
    Consult
    HONEYWELL™ Motor Driven Master Barrier for Linear Smoke Detection MorleyIAS® Conventional [F5000M]
    HONEYWELL™ Motor Driven Master Barrier for Linear Smoke Detection MorleyIAS® Conventional
    Ref.: F5000M
    Linear smoke detector by IR beam motorized master, composed of motorized linear detector, multifunction remote control unit and reflective . Sensor head with incorporated infrared beam transmitter and receiver, line-up remote moto -+ 10º and laser pointer with initial visual setting. Control and configuration remote unit for up to 2 detectors, with possibility of auto-compensation of signal, motorized aut-lineup, remote test, complete checking and setting of the system. Adjustable levels from 10% to 65% darkening. Breakdown and alarm verification, configurable from 2 to 30s. Alarm enclosed or rearmable.Indication of dirt level and compensation. Auto-setting functions allow auto-alignment and compensation of structural shift and automatic dirt compensation. Possibility of connecting 1 slave detector F5000S to the control unit. Range up to 50m extensible to 100 with F5000-LRK kit.
    V.A.T. included
    Consult
    HONEYWELL™ Linear Smoke Detector MorleyIAS® Analogical [MI-LPB2-S2I]
    HONEYWELL™ Linear Smoke Detector MorleyIAS® Analogical
    Ref.: MI-LPB2-S2I
    analogical smoke detection barrier by reflection of infrared light beam for analogical centrals.Includes transmitter and receiver in the same unit and a reflector element. Connected directly to the analogical communication loop and receives power supply from the loop itself, direction from 01 to 159. Easy line-up, the value of the received signal is indicated in two 7 segment displays. Incorporates dirt compensation, three state leds and a short-circuit isolator. Includes reflector (200 x 230 mm) for distances from 10 to 70 m, an additional complement being needed for longer distances (6500-LRK). Ideal for the protection of large industrial spaces and rooms with very high ceilings. Includes testing filters.
    V.A.T. included
    Consult
    HONEYWELL™ EExd Smoke Detection Barrier [FR2000EX]
    HONEYWELL™ EExd Smoke Detection Barrier
    Ref.: FR2000EX
    FR2000EX Barrier has the same features than F2000C Barrier but the emisor and receiver are specially design to be used in areas with explosion risk.
    V.A.T. included
    Consult
    HONEYWELL™ Additional Smoke Detection Barrier [F3000S]
    HONEYWELL™ Additional Smoke Detection Barrier
    Ref.: F3000S
    Smoke detector barrier which includes an additional transmitter + receiver combination to be monitored from the F3000M control unit.
    V.A.T. included
    Consult
    HONEYWELL™ Smoke Detection Barrier [F3000M]
    HONEYWELL™ Smoke Detection Barrier
    Ref.: F3000M
    Linear detection smoke barrier for conventional systems. Includes independent transmitte, receiver and a control unit with LCD display. Ideal for protecting large surface places and spaces with high ceilings in which the structure can have reflecting surfaces. Possibility of adding a transmitter+receiver combination to be monitored from the control unit. Incorporates automatic dirt compensation circuit, relay alarm and breakdown output circuit and indicator of state led. Requires a power supply of 12/24VDC from a supply according to EN54-4.
    V.A.T. included
    Consult
    HONEYWELL™ IR Linear Smoke Detector with Test Integrated [6500RSE]
    HONEYWELL™ IR Linear Smoke Detector with Test Integrated
    Ref.: 6500RSE
    Conventional smoke detector barrier by reflection of infrered light beam with integrated test. Includes transmitter and receiver in the same unit and a reflector element. Easy line-up, the value of the received signal is indicated in two 7 segment displays. Incorporates dirt compensation, three state leds and a short-circuit isolator. Includes reflector (200 x 230 mm) for distances from 10 to 70 m, an additional complement being needed for longer distances (6500-LRK). Ideal for the protection of large industrial spaces and rooms with very high ceilings. Includes testing filters.
    V.A.T. included
    Consult
    HONEYWELL™ IR Linear Smoke Detector [6500RE]
    HONEYWELL™ IR Linear Smoke Detector
    Ref.: 6500RE
    Conventional smoke detector barrier by reflection of infrared light beam. Includes transmitter and receiver in the same unit and a reflector element. Easy line-up, the value of the received signal is indicated in two 7 segment displays. Incorporates dirt compensation, three state leds and a short-circuit isolator. Includes reflector (200 x 230 mm) for distances from 10 to 70 m, an additional complement being needed for longer distances (6500-LRK). Ideal for the protection of large industrial spaces and rooms with very high ceilings. Includes testing filters.
    V.A.T. included
    Consult
    HONEYWELL™ IR Linear Smoke Detector with Test Included [NFXI-BEAM-TE]
    HONEYWELL™ IR Linear Smoke Detector with Test Included
    Ref.: NFXI-BEAM-TE
    analogical smoke detection barrier by reflection of infrared light beam for analogical centrals with integrated test. Includes transmitter and receiver in the same unit and a reflector element. Connected directly to the analogical communication loop and receives power supply from the loop itself, direction from 01 to 159. Easy line-up, the value of the received signal is indicated in two 7 segment displays. Incorporates dirt compensation, three state leds and a short-circuit isolator. Includes reflector (200 x 230 mm) for distances from 10 to 70 m, an additional complement being needed for longer distances (6500-LRK). Ideal for the protection of large industrial spaces and rooms with very high ceilings. Includes testing filters.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved