Accessory for rail mounting, 19" in grey colour for conventional extinction panels VSN-2PLUS serie RP1R-SUPRA and VSN-RP1R-PLUS2. Occupies 8U. Dimensions: 480 x 355 x 125mm.

Microprocessed conventional panel with 4 zones with 2 monitored and configurable siren outputs and 2 remote inputs. Allows the connection of 020-713 relay card (Optional). Batteries not included.

Microprocessed conventional panel with 8 zones with 2 monitored and configurable siren outputs and 2 remote inputs. Allows the connection of 020-713 relay card (Optional). Batteries not included.

Microprocessed conventional panel with 2 zones with 2 monitored and configurable siren outputs and 2 remote inputs. Allows the connection of 020-713 relay card (Optional). Batteries not included.

Coverage expander for MIW systems via radio to improve the covering distance. Occupy an output module direction in the loop and requires an extern power supply of 24VDC 25mA from a certified source in accordance with EN54-4 standard. Provide a double orthogonal antenna to guarantee communications and RS232 port for PC programmation. Can be associated with a maximum of 7 expenders for each MIW-INT interface, 5 are continued connected and up to a maximum of 3 connected to an other MIW-EXP.

Short-circuit insulator module for MorleyIAS® analogical system for loop protection. The insulator module works by opening the communications loop in the case of detection of a short-circuit in the line or if the voltage is under to 4V, leaving only out of service the zone comprised between two insulator modules. Its installation is recommended each 20 detectors or directionable module. Provided with a bicolour LED (Green: Bling when question the device; Yellow: Fix for faillure). Connection through removable terminals (Up to 2,5mm2 section). Multiples mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Loop interface via Radio for analogical system of occasional identification compatible with DXc and ZXs panels of MorleyIAS®. Connected and powersupply by the own loop, bidirectional connection with the fire detection panel with the same protocol than devices connected by wire. Provided with a double orthogonal antenna to ensure communications. MIW-INT can control a maximum of 32 MIW devices (Only 16 can be sounders or control module). Each interface occupy a module direction in the loop and associate up to 7 MIW-EXP expanders to expands the distance or improve the coverage. Programmable through a PC with WireIEX FIRE program via RS232 port or via intern keys and display, Moreove provide a option of devices auto search and indication of low battery for each device.

Monitor and control module directionable for MorleyIAS® analogical system. Its composed of 2 input circuits for monitoring of alarm initiation devices or technical signals that provides a voltage-free contact and 1 NA/NC relay output for activation of signalling or notification systems, doors, fire dampers, solenoids, etc through the own analogical loop. Includes short-circuit insulator. Easily directionable through two dedicated rotary microswitches placed in the front or side of the module (Accessibles and visibles in DIN mounting rail). Occupy three consecutives directions. Dispose of three tricolor LEDs, one for each channel (Green: blink when is asking to the device; Red: Fix active relay; Yellow: Blink for failure in the input circuit). Connection through removable terminals (up to 2,5mm2 of section). Multiples mounting possibilites: In surface through M200SMB or SMB6-V0 box, DIN rail trhough M200E-DIN adaptator or in panel through M200PMB support.

Output module for MorleyIAS® analogical system, for DIN rail mounting that provides free voltage contacts of 240VCA and 5A, such NA as NC. Allows to monitored and control auxiliaries devices. Includes short-circuit insulator. Easy directioning through two rotary push buttons. Provided with a bicolour LED (Green: Bling when question the device; Yellow: Fix for faillure). Connection through removable terminals (Up to 2,5mm2 section).

Directionable control module for MorleyIAS® analogical system, with 6 output circuits for systems activation of signalling or notification, solenoids, etc. through own analogical loop. Easy directioning through two rotary push buttons (01-99), occupies 6 consecutives directions in the loop modules. Provides with LED for status indication of the module.

Output module for MorleyIAS® analogical system in suface box that provides free voltage contact of 240VCA and 5A, such NA as NC. Allows to control extern devices (air handlers, lifts, contactors...) Includes a short-circuit insulador. Easy directioning through two rotary push buttons. Provided with bicolour LED (Green: Bling when question the device; Yellow: Fix for faillure).

Directionable control module with 6 output circuit in the form of NA/NC relay. Recommended for the activation, through communication loop, doors, fire dampers, lifts stop, etc... Includes a short-circuit insulator. Its connected directly to an analogical communication loop and its compatible with all MorleyIAS® analogical panels. Provided with micro-push buttons for directioning and tricolour LED indicator. Occupies 6 consecutive directions of the loop module.

Directionable control module for MorleyIAS® analogical system (Siren activation, doors and fire dampers...). With a configurable output through a switch as a monitored output or as NA/NC voltage free contact. Includes a short-circuit insulator. Easy directioning through two rotary push buttons placed in the frond and side part of the module (Accessible and visible in DIN rail mounting). Provide a tricolour LED (Green: Blink when question to the device; Red: Fixed in alarm; Yellow: Blink when there is failure in the input circuit). Connection through removable terminals (Up to 2,5mm2 section). Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable monitor module with 10 input circuits for monitoring of devices for alarm start or technical signal that provide a voltage free contact. Includes a short-circuit isolator. Allows the connection of open or closed loop devices (With closed loop, 5 input limited). Its connected directly to a communication loop and its compatible with all MorleyIAS® analogical panels. Provides with micropush buttons for directioning and tricolour LED indicators. Occupies 10 consecutive directions in the loop module.

Directionable monitor module for MorleyIAS® analogical system, with two supervised inputs for state signalization of extern devices that provides a contact normally open, identifying to the panel with a personalized message (Closed door, flow detector...). Includes short-circuit insulator. Easy directionning through two rotary push buttons placed in the front a the side of the module (Accessible and visible in DIN rail mounting). Provide a tricolour LED (Green: Blink when question to the device; Red: Fixed in alarm; Yellow: Blink when there is failure in the input circuit). Connection through removable terminals (Up to 2,5mm2 section). Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable monitor module for MorleyIAS® analogical system, with a supervised input for state signalization of extern devices that provides a contact normally open, identifying to the panel with a personalized message (Closed door, flow detector...). Includes short- circuit insulator. Easy directioning through two rotary placed in the front and the side of the module (Accessible and visible in DIN rail mounting). Provide a tricolour LED (Green: Blink when question to the device; Red: Fixed in alarm; Yellow: Blink when there is failure in the input circuit). Connection through removable terminals (Up to 2,5mm2 section). Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable micro-module monitor for MorleyIAS® analogical system, with a supervised input for status signalization of external devices that provides a free voltage contact, identifiying to the panel with a personalized message (Closed door, flow meter...). Easy directioning through two rotary push buttons.

Directionable multi-module for MorleyIAS® analogical system, with 6 zones that allows to connect up to 20 detectors ECO1000 for each zone. Easy directioning through two rotary push buttons, occupies 6 consecutives directions of loop modules.

Directionable monitor module for MorleyIAS® analogical system, with a conventional zone, with capacitive end of line, allows to connect up to 20 conventional detectors ECO1000, identified in the panel with a personalized message. Easy directioning through two rotary push buttons. Provided with a LED that indicate the device state. Includes a microswitch activable through a magnet to realize a local test. Includes a short-circuit insulator. Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable monitor module for MorleyIAS® analogical systems with a conventional zone with resistive end of line. Appropriate for intrinsic security detectors, Identified in the panel with a personalized message. Easy directioning through two rotary push buttons. Provided with a LED that permit to see the equipment state. Includes a Micro-switch activated through a magnet to realize a local test. Includes a short-circuit insulator. Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Communication interface card, RS-232 insulator port, to connect control and technical management systems or graphic programs to DX CONNEXION analogical panels.

Installer support tool for start-up and maintenance of analogical systems. Coloured touch screen with icons, intuitive use. Allows to diagnose the loop before panel connection and realize a verufication, indicate devices directions and possibles duplicated directions. Moreover, works with multimeter that allows to detect wire faillure.

Interface card that allows to connect 2 or more DX CONNEXION panels in a network. Includes electrical isolation between hubs. Maximum distance between hubs depend on the used cable, up to 1.200 meters. Requires one card per panel.

USB isolated interface cable for programming loading and unloading