English
Español
  • Search
    • +34 902930427

    0.00 €

    PCI Centrals and Modules

    Products 406
    NOTIFIER® Mini Monitor Module [NFX-MM1M]
    NOTIFIER® Mini Monitor Module
    Ref.: NFX-MM1M
    Mini directionable monitor module with 1 supervised input circuit for monitorisation of alarm devices or technic signal that provides voltage-free contact. Its connected directly to a analogical communicaction loop. Incorporates decadic direction (01-159)
    V.A.T. included
    112.68 €
    HONEYWELL™ IP/CRA Communication Module [UCIP]
    HONEYWELL™ IP/CRA Communication Module
    Ref.: UCIP
    Universal TCP-IP communicator for management system or central alarm receiver NFS-SUPRA, ID60, ID3000 and AM8200. Connection to up to 2 receivers with encrypted communication according to AES 128 level 4 standard on CONTACT ID. Transmission of events by zone or point. Direct connection to Ethernet NETWORK. Monitoring plot and periodic stay alive. Connection to the RS-232 port of the control panel. Complies with EN54 / 21 and EN50136 Grade 4. Requires 24 VDC power and SMBT box.
    V.A.T. included
    576.72 €
    HONEYWELL™ IP / ARC Communications Module by MODBUS [UCIP-MODBUS]
    HONEYWELL™ IP / ARC Communications Module by MODBUS
    Ref.: UCIP-MODBUS
    CRA communications module with IP connection by Unidirectional ModBus. Compatible with AM-8200, conventional NFS-Supra and Rp1r-Supra Extinguishing control panels.
    V.A.T. included
    1,765.56 €
    Protocol Converter for NOTIFIER® Panel to Modbus BACnet [IBOX-BAC-NID3000]
    Protocol Converter for NOTIFIER® Panel to Modbus BACnet
    Ref.: IBOX-BAC-NID3000
    Gateaway that convert ID3000 panel protocol to BACnet IP using ANSI X3.4 standard characters. Permit to monitor a unique panel with 8 loops each one with up to 99 sensors + 99 modules and 255 zones. Requires 24Vdc (150mA) and RS232 port available in ID3000 panel (Its recommended RS232 port for 020-478 card).
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net64C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net64C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 63 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net32C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net32C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 32 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net16C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net16C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 16 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net5C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net2C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net2C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 2 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-NID3K]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-NID3K
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus for 16 PEARL Panels [IBOX-MBS-PRLNET16C]
    Protocol Converter for NOTIFIER® Panel to Modbus for 16 PEARL Panels
    Ref.: IBOX-MBS-PRLNET16C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 16 panels with 2 loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus for 5 PEARL Panels [IBOX-MBS-PRLNET5C]
    Protocol Converter for NOTIFIER® Panel to Modbus for 5 PEARL Panels
    Ref.: IBOX-MBS-PRLNET5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 2 loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    NOTIFIER® Modbus Panels Protocol Converter [IBOX-MBS-PRL]
    NOTIFIER® Modbus Panels Protocol Converter
    Ref.: IBOX-MBS-PRL
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with two loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    NOTIFIER® IP Module [TG-IP1-SEC]
    NOTIFIER® IP Module
    Ref.: TG-IP1-SEC
    Redirector device of RS232 port of the panel to the graphic management software GT, through IP protocol. Compatible with Ethernet networks at 10 and 100 MHz. Dispose of port input RS232, Ethernet connection and 24V power supply.
    V.A.T. included
    693.25 €
    NOTIFIER® TG GSM Transmitter [TG-GSM]
    NOTIFIER® TG GSM Transmitter
    Ref.: TG-GSM
    Events transmitter from the panel to mobile phone through SMS. Compatible with all TG programms and ID50/60 panels. Requires GSM coverage, 24Vdc, a RS232 serie port from the PC and a SIM card.
    V.A.T. included
    Consult
    NOTIFIER® Converter from Cable to Single Mode Fiber [TCF142S]
    NOTIFIER® Converter from Cable to Single Mode Fiber
    Ref.: TCF142S
    Cable converter/amplifier of single mode fiber for ID2net network of ID3000 panels and Pearl up to 20km. Compatible with 8,3/125, 8,7/125, 9/125 and 10/125mm fiber. Requires 24Vdc/140mA from the panel. In Pearl panels its necessary 2 units per panel.
    V.A.T. included
    2,038.44 €
    NOTIFIER® Converter from Cable to Multi Mode Fiber [TCF142M]
    NOTIFIER® Converter from Cable to Multi Mode Fiber
    Ref.: TCF142M
    Cable converter/amplifier of multi mode fiber for ID2net network of ID3000 panels and Pearl up to 3km. Compatible with 50/125 and 62,5/125mm fiber. Transmission rate from 50 to 920bps. Requires 24Vdc/140mA from the panel. In Pearl panels its necessary 2 units per panel.
    V.A.T. included
    1,430.74 €
    Surface Mounting Box for HONEYWELL™ Transmitter [SMBT]
    Surface Mounting Box for HONEYWELL™ Transmitter
    Ref.: SMBT
    Box for surface mounting of UCIP/UCIP-GPRS transmitter. Have necessary holes to realize connections and quick and easy mounting inside panels. Built in antistatic ABS, cream colour and cover with space for identification sticker.
    V.A.T. included
    46.75 €
    HONEYWELL™ IP/CRA/GPRS/SMS Communication Module [UCIP-GPRS]
    HONEYWELL™ IP/CRA/GPRS/SMS Communication Module
    Ref.: UCIP-GPRS
    TCP-IP and GPRS Universal communicator for managment system connection or SMS status report and connection to panel alarm receiver (ID series and RP1r-Supra). Connection up to 2 receivers with encrypted communication according to AES 128 Level 4 standard about ID contact. Events transmission by zone or point. Direct connection to Ethernet network or GPRS mobile network. Monitoring frame and periodic stay alive for compatible receiver. Sent SMS status messages with device text, up to 2 users. No includes SIM card for GPRS/GMS network. Connection to RS-232 port. Fulfill EN54-21 and EN50136 Grade 4 standards. Requires 24VDC power supply and SMBT box.
    V.A.T. included
    893.84 €
    MorleyIAS® Diagnostic Tool [POL-200-TS]
    MorleyIAS® Diagnostic Tool
    Ref.: POL-200-TS
    Installer support tool for start-up and maintenance of analogical systems. Coloured touch screen with icons, intuitive use. Allows to diagnose the loop before panel connection and realize a verufication, indicate devices directions and possibles duplicated directions. Moreover, works with multimeter that allows to detect wire faillure.
    V.A.T. included
    1,786.21 €
    Module Interface for NOTIFIER® RP1R-SUPRA Extinction Panels [ITAC]
    Module Interface for NOTIFIER® RP1R-SUPRA Extinction Panels
    Ref.: ITAC
    Communication card that allows to transmit individualized information in each zone or extinction panel input to analogical panel where appears as input/output module using CLIP protocol. Depending on ITAC configuration, its possible to know the status of extinction equipment. Dirrectionable throught micropush buttons (01 to 99). Can occupy input and output directions to supervised. Its installated inside the integrated equipment and its power supplied.
    V.A.T. included
    459.20 €
    NOTIFIER® Link for Power Amplifier [002-629]
    NOTIFIER® Link for Power Amplifier
    Ref.: 002-629
    Device that increase the loop capacity to connect more power supply equipment as loop or sounders, flash or analogical barriers, Each 002-629 raise of 1 amp the loop capacity. Its recommended to no install more than two IDP-LB1 in each loop.
    V.A.T. included
    Consult
    40 Columns Thermal Printer for NOTIFIER® Devices [020-708-009]
    40 Columns Thermal Printer for NOTIFIER® Devices
    Ref.: 020-708-009
    Kit with thermal printer of 40 digits. Dispose of a communication interface RS232 range and use a COM A port included in all ID3000 analogical panels. Requires 020-508-009 cabine and 020-481-009 front conver. Check that COM A port of the panel is available. If its occupy for others devices connections (TG, ID-CRA or IBOX), Consult NOTIFIER.
    V.A.T. included
    Consult
    Cover Cap for NOTIFIER® ID3000 Supplement Cabinets [020-481-009]
    Cover Cap for NOTIFIER® ID3000 Supplement Cabinets
    Ref.: 020-481-009
    Frontal cover cap for 020-508-009, 020-509-009 and 020-474-009 expansion cabine.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved