Glass spare parts for manual button (Pack of 5).

Flip-top transparent lid.

Integrated LED indicator for easy operation identification. Surface or flush mount. Installation test key, accelerates maintenance visits. With outdoor short-circuit insulator.

Integrated LED indicator for easy operation identification. Surface or flush mount. Installation test key, accelerates maintenance visits. For outdoor installation without base.

For exposed tube mounting (FC420CPB)

Integrated LED indicator for easy operation identification. Surface or flush mount. Installation test key, accelerates maintenance visits. With indoor short-circuit insulator.

This source allows to power supply simultaneously up to 10 Standgas™ units. Technical specifications: Input voltage 100-240V AC 50-60Hz, Output: 12V 5A DC.

Theses suppots are indicated for Standgas™ LCD versions. Thanks to its declination angle, allows a better viewing of the display when the detector is installated in ceiling or floor. For its design are reversibles, and therefore suitable for two positions.

Theses supports are indicated for Standgas™ LCD versions. Thanks to its declination angle, allows a better viewing of the display when the detector is installated in the ceiling or the floor. For its design are reversible, and therefore suitable for two positions.

Independent catalytic technology detector for the detection of explosive gases. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from the v04 DURGAS™ version). Allows to programe the type of gas, prealarm level, alarm level, initial state of the manoeuvre output, type of rearming manual or automatic, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout. Calibrated in factory with span gas. No need to recalibrate in the initial set up. Resistant to silicone vapours (HDMS). Independent version RS485: Specially recommended for its use in laboratories or compartimentalized areas which, apart from its local use, need a control and making manoeuvres and remotely informing about its state. Up to 8 units per area can be connected, maintaining its compatibility with the rest of the gases.

Independent electrochemical and infrared technology detector for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Independent electrochemical and infrared technology for the detection of toxic gases and O2. Independent functioning, does not require central. There is a new independent version with RS485 addressable communication compatible with DURGAS™ centrals (from the v04 DURGAS™ version). Provided with a 16 X 2 lines display, backlit and three buttons. Allows to programme the prealarm level, alarm level, initial state of manoeuvre output, type of manual or automatic rearming, rearming timing, activation or non activation of the internal acoustics and possibility of inhibiting the sensor to avoid inappropriate manoeuvres in case of breakout.

Detector autónomo diseñado para la detección de gases explosivos con tecnología catalítica (pellistor), para un rango de detección de 0 al 100% L.I.E. y resistente a los vapores de siliconas. Disponible también una versión especial con tres salidas de relé programables. Indicaciones ópticas de estados y avería del sensor. Selección del gas a detectar mediante jumper. Estado inicial de relé de alarma programable. Niveles de alarma programables, hasta 3 niveles versión especial o dos niveles mas una salida de avería. Retardo de activación de relé de alarma programable, fijo versión especial. Grado de protección IP65.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations (STANDGAS O2 does not require this characteristic). Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.

Autonomous programmable detector designed for the detection of explosive gases with catalytic technology (pellistor), for a detection range of 0 to 100% L.I.E. and resistant to silicone vapors. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Especially suitable for use in laboratories or compartmentalized areas that, in addition to local use, need control and perform maneuvers and report their status remotely.

Autonomous programmable detector designed for the detection of explosive gases with catalytic technology (pellistor), for a detection range of 0 to 100% L.I.E. and resistant to silicone vapors. Provided with a backlit 16 X 2-line display, three keys, programmable alarm relay output and internal acoustics. Especially suitable for use in laboratories or compartmentalized areas that, in addition to local use, need control and perform maneuvers and report their status remotely.

Autonomous programmable detector designed for the detection of toxic gases and O2 with electrochemical technology and CO2 with infrared technology. Three programmable alarm relay outputs with different levels for each gas. Digital control over the state of the sensor. Automatic hardware status testing. Digital filter based on variable sampling of the averages of the sensor values. Automatic thermal compensation that provides a correct response to temperature variations. Exact automatic zero adjustment. Monitors zero relative to sensor and electronics response. STANDGAS automatically performs a test every 30 minutes: if the drift -drift- is greater or less than 2% of the total scale value, it will be reset to zero; otherwise the data will be displayed as a reading. Other functions only accessible at the factory allow knowing the remaining useful life of the sensor, the date of manufacture and the last calibration, in addition to the serial number.