English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    DURÁN® DIREX™ X IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector with Relay [DIRY4LX-HCr]
    DURÁN® DIREX™ X IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector with Relay
    Ref.: DIRY4LX-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,283.04 €
    DURÁN® DIREX™ X IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector [DIRY4LX-HC]
    DURÁN® DIREX™ X IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector
    Ref.: DIRY4LX-HC
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,197.66 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector with Relay [DIRY4LXCO2r]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector with Relay
    Ref.: DIRY4LXCO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,283.04 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector [DIRY4LXCO2]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm 4-20mA Gas Detector
    Ref.: DIRY4LXCO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,197.66 €
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector with Relay [DIRY4-HCr]
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector with Relay
    Ref.: DIRY4-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    934.41 €
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector [DIRY4-HC]
    DURÁN® DIREX™ IR Hydrocarbon (Indicate Gas) 4-20mA Gas Detector
    Ref.: DIRY4-HC
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    830.06 €
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000 ppm 4-20mA Gas Detector with Relay [DIRY4CO2r]
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000 ppm 4-20mA Gas Detector with Relay
    Ref.: DIRY4CO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    934.41 €
    DURÁN® DIREX™ IR CO2 0-2%vol. 0-20.000ppm 4-20mA Gas Detector [DIRY4CO2]
    DURÁN® DIREX™ IR CO2 0-2%vol. 0-20.000ppm 4-20mA Gas Detector
    Ref.: DIRY4CO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    830.06 €
    DURÁN® DIREX™ X IR Hidrocarbon RS485 Gas Detector with Relay [DIRYLX-HCr]
    DURÁN® DIREX™ X IR Hidrocarbon RS485 Gas Detector with Relay
    Ref.: DIRYLX-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,179.87 €
    DURÁN® DIREX™ X IR Hidrocarbon RS485 Gas Detector [DIRYLX-HC]
    DURÁN® DIREX™ X IR Hidrocarbon RS485 Gas Detector
    Ref.: DIRYLX-HC
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,119.40 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay [DIRYLXCO2r]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay
    Ref.: DIRYLXCO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,179.87 €
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector [DIRYLXCO2]
    DURÁN® DIREX™ X IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector
    Ref.: DIRYLXCO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. Explosion-proof ATEX housing with ATEX certificate LOM08ATEX2059 X. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    1,119.40 €
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector with Relay [DIRY-HCr]
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector with Relay
    Ref.: DIRY-HCr
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    845.48 €
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector [DIRY-HC]
    DURÁN® DIREX™ IR Hidrocarbon RS485 Gas Detector
    Ref.: DIRY-HC
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    738.75 €
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay [DIRYCO2r]
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector with Relay
    Ref.: DIRYCO2r
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    845.48 €
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector [DIRYCO2]
    DURÁN® DIREX™ IR CO2 0-2% vol. 0-20.000ppm RS485 Gas Detector
    Ref.: DIRYCO2
    DIREX has been specially designed for: (1) Installations with the presence of inhibitory or poisonous gases from catalytic detectors -pellistors-. These gases do not affect DIREX. (2) In atmospheres where there is no presence of oxygen. DIREX, unlike pellistors, does not need oxygen for its operation. (3) Installations in which maintenance operations must be minimized. DIREX only requires one review every 3 years. In infrared detection, unlike other technologies, the presence of the gas to be detected does not reduce the useful life of the sensor. DIREX is not affected by this phenomenon. Available gases: Methane, Natural Gas, Propane and CO2. IP65 plastic housing. Detection range from 0 to 100% L.I.E. (explosives) and 0 to 2% vol (CO2). Optical indications of loop and sensor failure.
    V.A.T. included
    738.75 €
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring) without Base [DKDSNO2RS]
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring) without Base
    Ref.: DKDSNO2RS
    Especially design for parkings uses. Model for NO2 detection with a range of 0-20ppm and a resulution of ± 0.5ppm. ABS. IP20. Without base. Connection at 4 wires through RS485.
    V.A.T. included
    217.59 €
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring) [DKDTNO2RS]
    DURPARK™ RS485 NO2 Detector 0-20ppm (Red Ring)
    Ref.: DKDTNO2RS
    Especially design for parkings uses. Model for NO2 detection with a range of 0-20ppm and a resulution of ± 0.5ppm. ABS. IP20. Connection at 4 wires through RS485.
    V.A.T. included
    228.86 €
    Base for DURPARK™ RS485 CO/NO2 Detector [DKBADTRS]
    Base for DURPARK™ RS485 CO/NO2 Detector
    Ref.: DKBADTRS
    Base for DURPARK™ RS485 detectors. Especially design for parkings uses. ABS. IP20.
    V.A.T. included
    11.27 €
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring) without Base [DKDSCORS]
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring) without Base
    Ref.: DKDSCORS
    Especially design for Parkings uses. Model for CO detection with a range of 0-300ppm and a resolution of ± 1ppm. with an algorithm and a special hardware that allows to check the sensor sensitivity without necessity of gas implement. Without base. ABS. IP20. Connection at 4 wires through RS485.
    V.A.T. included
    75.77 €
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring) [DKDTCORS]
    DURPARK™ RS485 CO Detector 0-300ppm (Amber Ring)
    Ref.: DKDTCORS
    Especially design for Parkings uses. Model for CO detection with a range of 0-300ppm and a resolution of ± 1ppm. with an algorithm and a special hardware that allows to check the sensor sensitivity without necessity of gas implement. ABS. IP20. Connection at 4 wires through RS485.
    V.A.T. included
    87.04 €
    DURPARK™ NO2 Detector 0-20ppm (Blue Ring) without Base [DKDSNO2]
    DURPARK™ NO2 Detector 0-20ppm (Blue Ring) without Base
    Ref.: DKDSNO2
    Especially design for parkings uses. Modele for NO2 uses with a range of 0-20 ppm and a resolution of ± 0.5ppm. ABS. IP20. Without base.
    V.A.T. included
    208.11 €
    DURPARK™NO2 Detector 0-20ppm (Blue Ring) with Base [DKDTNO2]
    DURPARK™NO2 Detector 0-20ppm (Blue Ring) with Base
    Ref.: DKDTNO2
    Especially design for parkings uses. Model for NO2 detection with a range of 0-20ppm and a resulution of ± 0.5ppm. ABS. IP20.
    V.A.T. included
    217.00 €
    Base for CO/NO2 DURPARK™ Detector [DKBADT]
    Base for CO/NO2 DURPARK™ Detector
    Ref.: DKBADT
    Base for DURPARK™ detectors. Especially design for parkings uses. ABS. IP20.
    V.A.T. included
    8.89 €
    SYSAWAY© 2024 All rights reserved